A white version of the natural cork ball. The dyeing process hardens the cork and produces a smoother ball for slightly faster play.
• Material: Dyed cork • Weight: 10 g

Aluminium external ball return part on the B60

Internal vertical separator made of isorel, for ball distribution on the B60.

Stainless steel back for the B60 and B90 goals.

Score counter system, stainless steel rod and high-impact polystyrene balls

Polished cast aluminium part, attached to the cabinet from the inside with 2 steel nuts + 2 washers

System used to trigger a game of foosball with a coin or appropriate token. High-precision system fully designed and produced in Bagnolet by Bonzini.
Can be modified to take any type of coin.

Fully lacquered and secure metal coin box for the B60

Plastic ball chute located inside the B60, on the right side

Plastic ball chute located inside the B60, on the left side

Plastic ball return chute located centrally inside the B60

Key to the lock of the B60 model

Metal shutter type open/close lock for the B60 cabinet

Wooden lever used to hold the top of the B60 cabinet open for maintenance

Set of 4 metal parts which comprise the lower portion of the B60 cabinet closure system

Metal part connected to the lock to open and close the B60 cabinet (2 identical parts per table football table).

Metal part used to lock the cabinet, installed on the upper part of the B60 cabinet
(2 identical parts, one left and one right)

Set of 2 metal hinges used to open the pitch for cleaning

Set of two garnet hinges used to open the B60 cabinet

Extra-sturdy textured rubber disc attached to the bottoms of the babyfoot table legs to prevent sliding during games

Large nickel-plated metal washer placed between the leg bolt and the varnished cabinet.

Tapped metal part attached to the inside of the cabinet of B60 and B90 models to hold the leg bolts to attach the legs to the table

10 mm diameter hex-head screw used to attach the legs to the cabinet
(Bolt length: 55 mm for the B60 and B90, 70 mm for the Stadium).

Leg strut in lacquered solid wood, fits into one left leg and one right leg. The B90 and B60 tables take different lengths. Specify when ordering.

Lacquered solid wood part. Left leg and right leg versions available. Please specify when ordering. The B90 and B60 tables take different lengths.

Set of 2 left legs, 2 right legs and 2 cross-pieces in lacquered solid wood.
The B90 and B60 tables take different lengths.

Nickel-plated cap nut used to tighten the tie rod on small or large cabinets

Nickel-plated cap washer used as a tightening support for the tie rod on small or large cabinets

Double-ended threaded steel rod which backs up the carpentry joints with mechanical parts. Includes the 2 tie rod washers and 2 tie rod nuts.

Metal part which connects the moving metal ball return system to the coin mechanism

Metal assembly located in the inside centre of the B60 which distributes balls to players when the coin mechanism is used

Red plastic railing applied hot to each upper edge of the cabinet, on top of a steel form.

Varnished solid wood part which forms the wall around the pitch. Stapled to the short inner sides of the cabinet Specify right or left side of the goal when ordering

Varnished solid wood part which forms the wall around the pitch. Stapled to the long inner sides of the cabinet

Set of 2 large pieces, 2 small left-side pieces and 2 small right-side pieces (total of 6 solid wood parts), all solid wood. Stapled to the 4 inner sides of the cabinet around the pitch.

Set of 4 metal parts used to open or close the split base of the B60.

Black PVC (without solvents or heavy metals), covering for the playfield

Light grey PVC (without solvents or heavy metals), covering for the playfield

Green PVC (without solvents or heavy metals) covering glued to the playfield

Fixed playfield with pitch (split version only for the B60 for pitch cleaning)

Fibre washer placed between the bearing screw and the cabinet as a tightening support

8-Pointed polished aluminium nut used to tighten the bearing body

Nylon bearing

Mechanical guide assembly including a nickel-plated bearing body, an aluminium screw, a nylon bearing and a nickel-plated external spring For the B60 and B90

Highly-resistant washer used in the shock absorber system for one rod movement direction. Located between the external spring and the neoprene ring.

Black rubber ring used in the rod shock absorber system for direction of movement. Located between the player and the polyurethane washer.

Nickel-plated metal spring housed in the body of the bearing; a component of the rod movement shock absorber system.

Metallic nickel-plated stopper attached to the goal rod

Treated steel split pin used to attach the threaded aluminium tip to the rod

Threaded aluminium part attached to the player rod, used to attach the handle

Tempered steel shock absorber spring with a felt oil reserve, placed inside the player rod.

Round head wood screw used to attach the inner rod to the cabinet

Fixed inner rod made of polished ground steel, over which the outer player rod is fitted

Extremely flexible threaded metal wand designed to hold the brush used to clean the insides of the player rods

Metal brush attached to the wand to clean the insides of the player rods

Nylon brush attached to the wand for final cleaning of the insides of the player rods

Vaseline oil recommended for internal rod lubrication

External rod (player not included) to which the goal keeper is attached

External rod (player not included) with internal spring and aluminium tip

Small container of paint with a brush for player touch-ups: available in red, blue, black, white and skin-tone.

Allen wrench

High-resistance 6 x 20 mm diameter hex socket head screw used to attach the player to the rod

Aluminium player with blue jersey and socks, kiln painted

Aluminium player with red jersey and socks, kiln painted

Steel reverse-thread screw used to attach new and transparent UA long handles

Steel reverse-thread screw used to attach long handles, USA long handles, and aluminium, magnesium and snake handles

Steel reverse-thread screw used to attach black or red round handles

Pear-shaped handle, a comfortable alternative to the round handle.

Material: Special technical polymer - Dimensions and weight: Diameter 45 mm / L 65 mm / 68 g

For more information: visit the “Our Handles” section.

A comfortable yet elegant handle that coordinates perfectly with all the special finishes and colours available for all our models.

Material: PMMA - Weight: 73 g

For more information: visit the “Our Handles” section.

The most versatile handle for babyfoot players of all ages.

Material: Black thermohardening plastic - Dimensions and weight: Diameter 35 mm / L 99 mm / 90 g

For more information: visit the “Our Handles” section.

Popular for its design and its heavier weight for more intense play.

Material: Aluminium, shiny finish. Engraved Bonzini logo. Weight: 139 g

For more information: visit the “Our Handles” section!

Technical handle designed to meet the needs of competitive table football players, for a lighter handle with enhanced grip resistance.

Material: Magnesium; this material develops a patina over time. Engraved Bonzini logo - Weight: 92 g

For more information: visit the “Our Handles” section!

The historic handle found on the babyfoot tables in most cafés in the south of France and neighbouring countries.

Material: Black bakelite - Dimensions and weight: Diameter 34 mm / L 80 mm / 73 g

For more information: visit the “Our Handles” section!

The historic handle found on the babyfoot tables in most cafés in the Paris region and northern France.
Offers a firm grip with anti-slip grooving for «Paris-style” play» .

Material: Bakelite. Dimensions and weight: Diameter 47 mm / L 47 mm / 90 g

For more information: visit the “Our Handles” section.

The historic handle found on the babyfoot tables in most cafés in the Paris region and northern France.
Offers a firm grip with anti-slip grooving for «Paris-style” play» .

Material: Bakelite. Dimensions and weight: Diameter 47 mm / L 47 mm / 70 g

For more information: visit the “Our Handles” section.

These hard plastic balls are sturdier than cork balls. They have a slippery surface for play that moves very fast but can be hard to control.
• Material: Plastic • Weight: 19 g

A higher-density version of the natural cork ball. The heavier weight allows more powerful shots. The yellow dye hardens the ball’s surface.
• Material: Dyed cork • Weight: 17 g

Ball approved by the International Federation; it meets the criteria for elite competition. For more information: Bonzini ITSF
• Material: composite plastic • Weight: 19 g • Official marking: itsf-B

A yellow version of the natural cork ball. The dyeing process hardens the cork’s surface and produces a smoother ball for slightly faster play.
• Material: Dyed cork • Weight: 10 g

This is the original ball, and is still the lightest and most versatile. It works for all play styles.
• Material: Natural cork • Weight: 10 g

An ultra-contemporary shiny and matte finish and a new feel!

Material: Aluminium and silicone in dusty rose - Weight: 139 g

For more information: visit the “Our Handles” section.

An ultra-contemporary shiny and matte finish and a new feel!

Material: Aluminium and silicone in pastel green - Weight: 139 g

For more information: visit the “Our Handles” section.

An ultra-contemporary shiny and matte finish and a new feel!

Material: Aluminium and silicone in pastel blue - Weight: 139 g

For more information: visit the “Our Handles” section!

An ultra-contemporary shiny and matte finish and a new feel!

Material: Aluminium and silicone in anthracite grey - Weight: 139 g

For more information: visit the “Our Handles” section.

External rod with threaded steel end and special ITSF Mécanindus pin to which the goal keeper is attached, player not included.

External rod with threaded steel end and special ITSF Mécanindus pin, player not included.

Threaded steel ITSF rod tip

Treated steel split pin (4 mm diameter instead of 3 mm) used to attach the ITSF threaded steel tip to the rod

Playfield with pitch; split version only for the B60 for pitch cleaning

Plastic railing applied hot to each upper edge of the cabinet, on top of a steel form. Colour other than red (contact us).

Double-ended threaded steel rod which reinforces the carpentry joints with mechanical parts; only on the lower section of the B60. Includes 2 tie rod washers and 2 tie rod nuts.

Set of 2 left legs, 2 right legs and 2 cross-pieces in lacquered solid wood. The B60 and B90 tables take different lengths.

Set of 2 left legs, 2 right legs and 2 cross-pieces in lacquered solid wood. The length and thickness of these parts is different from our other models.

Polished cast aluminium part, attached to the cabinet from the top using pins

Protective cap for the Stadium’s rod screws for user safety

Rubber piece used to cushion the rod’s movements in one direction

Self-lubricating guide for the Stadium’s rods

Clip-type fastener for the Stadium’s plastic goal

Fixed inner rod made of polished ground steel, no rod support, over which the outer player rod is fitted