Our Catalogue: B60
Parts
Bonzini supplies the parts you need to maintain, restore or repair all of its models. If you have any questions about which part to order, feel free to contact our team at +33 (0)1 43 60 34 46 or using our contact form..
These hard plastic balls are sturdier than cork balls. They have a slippery surface for play that moves very fast but can be hard to control.
• Material: Plastic • Weight: 19 g
Varnished solid wood part which forms the wall around the pitch. Stapled to the short inner sides of the cabinet. For right side of the goal.
Varnished wall - Small version for left side
Varnished solid wood part which forms the wall around the pitch. Stapled to the long inner sides of the cabinet
Set of 2 large pieces, 2 small left-side pieces and 2 small right-side pieces (total of 6 solid wood parts), all solid wood. Stapled to the 4 inner sides of the cabinet around the pitch.
A comfortable yet elegant handle that coordinates perfectly with all the special finishes and colours available for all our models.
Material: PMMA - Weight: 73 g
For more information: visit the “Our Handles” section.
The most versatile handle for babyfoot players of all ages.
Material: Black thermohardening plastic - Dimensions and weight: Diameter 35 mm / L 99 mm / 90 g
For more information: visit the “Our Handles” section.
Small container of paint with a brush for player touch-ups: available in red, blue, black, white and skin-tone.
Nickel-plated cap washer used as a tightening support for the tie rod on small or large cabinets
Nickel-plated cap nut used to tighten the tie rod on small or large cabinets
Set of 2 left legs, 2 right legs and 2 cross-pieces in lacquered solid wood.
The B90 and B60 tables take different lengths.
Metal brush attached to the wand to clean the insides of the player rods
Stainless steel back for the B60 and B90 goals.
Playfield with pitch; split version only for the B60 for pitch cleaning
Set of 4 metal parts used to open or close the split base of the B60.
The longest Bonzini handle, designed for the “Snake” or “Snake shot” technique, style of play common in national and international competitions.
Material: Magnesium; this material develops a patina over time. Engraved Bonzini logo. - Dimensions and weight: Diameter 30 mm / L 120 mm / 120 g
For more information: visit the “Our Handles” section.
Plastic ball chute located inside the B60, on the right side
Red plastic railing applied hot to each upper edge of the cabinet, on top of a steel form.
Plastic railing applied hot to each upper edge of the cabinet, on top of a steel form. Colour other than red (contact us).
Score counter system, stainless steel rod and high-impact polystyrene balls
The historic handle found on the babyfoot tables in most cafés in the Paris region and northern France.
Offers a firm grip with anti-slip grooving for «Paris-style” play» .
Material: Bakelite. Dimensions and weight: Diameter 47 mm / L 47 mm / 90 g
For more information: visit the “Our Handles” section.
The historic handle found on the babyfoot tables in most cafés in the Paris region and northern France.
Offers a firm grip with anti-slip grooving for «Paris-style” play» .
Material: Bakelite. Dimensions and weight: Diameter 47 mm / L 47 mm / 70 g
For more information: visit the “Our Handles” section.
External rod (player not included) with internal spring and aluminium tip
Vaseline oil recommended for internal rod lubrication
Steel reverse-thread screw used to attach black or red round handles, and USA Long handle, transparent.
Steel reverse-thread screw used to attach new.
Steel reverse-thread screw used to attach long handles, USA long handles, and aluminium, magnesium and snake handles
Black PVC (without solvents or heavy metals), covering for the playfield
Light grey PVC (without solvents or heavy metals), covering for the playfield
Green PVC (without solvents or heavy metals) covering glued to the playfield
Highly-resistant washer used in the shock absorber system for one rod movement direction. Located between the external spring and the neoprene ring.
Polished cast aluminium part, attached to the cabinet from the inside with 2 steel nuts + 2 washers
Aluminium player with red jersey and socks, kiln painted, without shoulder.
Aluminium player with blue jersey and socks, kiln painted, without shoulder.
Allen wrench
High-resistance 6 x 20 mm diameter hex socket head screw used to attach the player to the rod
Ball approved by the International Federation; it meets the criteria for elite competition. For more information: Bonzini ITSF
• Material: composite plastic • Weight: 19 g • Official marking: itsf-B
Nylon brush attached to the wand for final cleaning of the insides of the player rods
Nylon bearing
Metallic nickel-plated stopper attached to the goal rod
Metal part which connects the moving metal ball return system to the coin mechanism
Black rubber ring used in the rod shock absorber system for direction of movement. Located between the player and the polyurethane washer.
This is the original ball, and is still the lightest and most versatile. It works for all play styles.
• Material: Natural cork • Weight: 10 g
Set of 4 metal parts which comprise the lower portion of the B60 cabinet closure system
Treated steel split pin used to attach the threaded aluminium tip to the rod
Technical handle designed to meet the needs of competitive table football players, for a lighter handle with enhanced grip resistance.
Material: Magnesium; this material develops a patina over time. Engraved Bonzini logo - Weight: 92 g
For more information: visit the “Our Handles” section!
The historic handle found on the babyfoot tables in most cafés in the south of France and neighbouring countries.
Material: Black bakelite - Dimensions and weight: Diameter 34 mm / L 80 mm / 73 g
For more information: visit the “Our Handles” section!
Popular for its design and its heavier weight for more intense play.
Material: Aluminium, shiny finish. Engraved Bonzini logo. Weight: 139 g
For more information: visit the “Our Handles” section!
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in dusty rose - Weight: 139 g
For more information: visit the “Our Handles” section.
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in pastel green - Weight: 139 g
For more information: visit the “Our Handles” section.
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in pastel blue - Weight: 139 g
For more information: visit the “Our Handles” section!
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in anthracite grey - Weight: 139 g
For more information: visit the “Our Handles” section.
Metal shutter type open/close lock for the B60 cabinet
Large nickel-plated metal washer placed between the leg bolt and the varnished cabinet.
Tapped metal part attached to the inside of the cabinet of B60 and B90 models to hold the leg bolts to attach the legs to the table
10 mm diameter hex-head screw used to attach the legs to the cabinet
(Bolt length: 55 mm for the B60 and B90, 70 mm for the Stadium).
Plastic ball chute located inside the B60, on the left side
Tempered steel shock absorber spring with a felt oil reserve, placed inside the player rod.
Set of 2 metal hinges used to open the pitch for cleaning
A higher-density version of the natural cork ball. The heavier weight allows more powerful shots. The yellow dye hardens the ball’s surface.
• Material: Dyed cork • Weight: 17 g
External rod (player not included) to which the goal keeper is attached
Wooden lever used to hold the top of the B60 cabinet open for maintenance
Fixed inner rod made of polished ground steel, over which the outer player rod is fitted
Double-ended threaded steel rod which reinforces the carpentry joints with mechanical parts; only on the lower section of the B60. Includes 2 tie rod washers and 2 tie rod nuts.
Double-ended threaded steel rod which backs up the carpentry joints with mechanical parts. Includes the 2 tie rod washers and 2 tie rod nuts.
Mechanical guide assembly including a nickel-plated bearing body, an aluminium screw, a nylon bearing, a nickel-plated external spring and a fiber washer. For the B60 and B90
Fiber washer placed between the bearing screw and the cabinet as a tightening support
Nickel-plated metal spring housed in the body of the bearing; a component of the rod movement shock absorber system.
A yellow version of the natural cork ball. The dyeing process hardens the cork’s surface and produces a smoother ball for slightly faster play.
• Material: Dyed cork • Weight: 10 g
La balle originale marquée au laser
La balle originale en liège marquée au laser. C'est la plus polyvalente et la plus légère de nos balles. Elle s'adapte à tous les types de jeux.
Matière : Liège brut - Poids : 10 gr
A white version of the natural cork ball. The dyeing process hardens the cork and produces a smoother ball for slightly faster play.
• Material: Dyed cork • Weight: 10 g
Metal assembly located in the inside centre of the B60 which distributes balls to players when the coin mechanism is used
System used to trigger a game of foosball with a coin or appropriate token. High-precision system fully designed and produced in Bagnolet by Bonzini.
Can be modified to take any type of coin.
Fully lacquered and secure metal coin box for the B60
Metal part connected to the lock to open and close the B60 cabinet (2 identical parts per table football table).
Metal part used to lock the cabinet, installed on the upper part of the B60 cabinet
(2 identical parts, one left and one right)
Plastic ball return chute located centrally inside the B60
Lock key for professional model B60. Triangular shaped key compatible with B60 manufactured since November 2012. To check the year...
Set of two garnet hinges used to open the B60 cabinet
Extremely flexible threaded metal wand designed to hold the brush used to clean the insides of the player rods
Internal vertical separator made of isorel, for ball distribution on the B60.
Aluminium external ball return part on the B60
Lock key for professional model B60. Triangular-shaped key compatible with B60s manufactured between November 1989 and November 2012. To check the year...
Extra-sturdy textured rubber disc attached to the bottoms of the babyfoot table legs to prevent sliding during games
Threaded aluminium part attached to the player rod, used to attach the handle
8-Pointed polished aluminium nut used to tighten the bearing body
Round head wood screw used to attach the inner rod to the cabinet
DID YOU KNOW?
Our B60 and B90 foosball tables last 30 to 40 years!
For more information: visit the “100% French Quality” section!