Our Catalogue: ITSF
Parts
Bonzini supplies the parts you need to maintain, restore or repair all of its models. If you have any questions about which part to order, feel free to contact our team at +33 (0)1 43 60 34 46 or using our contact form..
Round head wood screw used to attach the inner rod to the cabinet
High-resistance 6 x 20 mm diameter hex socket head screw used to attach the player to the rod
These hard plastic balls are sturdier than cork balls. They have a slippery surface for play that moves very fast but can be hard to control.
• Material: Plastic • Weight: 19 g
This is the original ball, and is still the lightest and most versatile. It works for all play styles.
• Material: Natural cork • Weight: 10 g
A white version of the natural cork ball. The dyeing process hardens the cork and produces a smoother ball for slightly faster play.
• Material: Dyed cork • Weight: 10 g
A yellow version of the natural cork ball. The dyeing process hardens the cork’s surface and produces a smoother ball for slightly faster play.
• Material: Dyed cork • Weight: 10 g
Treated steel split pin (4 mm diameter instead of 3 mm) used to attach the ITSF threaded steel tip to the rod
Nickel-plated cap washer used as a tightening support for the tie rod on small or large cabinets
La balle originale marquée au laser
La balle originale en liège marquée au laser. C'est la plus polyvalente et la plus légère de nos balles. Elle s'adapte à tous les types de jeux.
Matière : Liège brut - Poids : 10 gr
10 mm diameter hex-head screw used to attach the legs to the cabinet
(Bolt length: 55 mm for the B60 and B90, 70 mm for the Stadium).
Fibre washer placed between the bearing screw and the cabinet as a tightening support
Large nickel-plated metal washer placed between the leg bolt and the varnished cabinet.
A higher-density version of the natural cork ball. The heavier weight allows more powerful shots. The yellow dye hardens the ball’s surface.
• Material: Dyed cork • Weight: 17 g
Steel reverse-thread screw used to attach new and transparent UA long handles
Steel reverse-thread screw used to attach long handles, USA long handles, and aluminium, magnesium and snake handles
Steel reverse-thread screw used to attach black or red round handles
Ball approved by the International Federation; it meets the criteria for elite competition. For more information: Bonzini ITSF
• Material: composite plastic • Weight: 19 g • Official marking: itsf-B
Black rubber ring used in the rod shock absorber system for direction of movement. Located between the player and the polyurethane washer.
Highly-resistant washer used in the shock absorber system for one rod movement direction. Located between the external spring and the neoprene ring.
Allen wrench
Nickel-plated metal spring housed in the body of the bearing; a component of the rod movement shock absorber system.
Nylon bearing
Tapped metal part attached to the inside of the cabinet of B60 and B90 models to hold the leg bolts to attach the legs to the table
Tempered steel shock absorber spring with a felt oil reserve, placed inside the player rod.
The historic handle found on the babyfoot tables in most cafés in the Paris region and northern France.
Offers a firm grip with anti-slip grooving for «Paris-style” play» .
Material: Bakelite. Dimensions and weight: Diameter 47 mm / L 47 mm / 90 g
For more information: visit the “Our Handles” section.
The historic handle found on the babyfoot tables in most cafés in the Paris region and northern France.
Offers a firm grip with anti-slip grooving for «Paris-style” play» .
Material: Bakelite. Dimensions and weight: Diameter 47 mm / L 47 mm / 70 g
For more information: visit the “Our Handles” section.
Threaded steel ITSF rod tip
Metallic nickel-plated stopper attached to the goal rod
Pear-shaped handle, a comfortable alternative to the round handle.
Material: Special technical polymer - Dimensions and weight: Diameter 45 mm / L 65 mm / 68 g
For more information: visit the “Our Handles” section.
8-Pointed polished aluminium nut used to tighten the bearing body
Small container of paint with a brush for player touch-ups: available in red, blue, black, white and skin-tone.
Metal brush attached to the wand to clean the insides of the player rods
Nylon brush attached to the wand for final cleaning of the insides of the player rods
Vaseline oil recommended for internal rod lubrication
The most versatile handle for babyfoot players of all ages.
Material: Black thermohardening plastic - Dimensions and weight: Diameter 35 mm / L 99 mm / 90 g
For more information: visit the “Our Handles” section.
Double-ended threaded steel rod which backs up the carpentry joints with mechanical parts. Includes the 2 tie rod washers and 2 tie rod nuts.
Extremely flexible threaded metal wand designed to hold the brush used to clean the insides of the player rods
A comfortable yet elegant handle that coordinates perfectly with all the special finishes and colours available for all our models.
Material: PMMA - Weight: 73 g
For more information: visit the “Our Handles” section.
Aluminium player with blue jersey and socks, kiln painted
Aluminium player with red jersey and socks, kiln painted
Varnished solid wood part which forms the wall around the pitch. Stapled to the short inner sides of the cabinet Specify right or left side of the goal when ordering
Red plastic railing applied hot to each upper edge of the cabinet, on top of a steel form.
Fixed inner rod made of polished ground steel, over which the outer player rod is fitted
Mechanical guide assembly including a nickel-plated bearing body, an aluminium screw, a nylon bearing and a nickel-plated external spring For the B60 and B90
Plastic railing applied hot to each upper edge of the cabinet, on top of a steel form. Colour other than red (contact us).
Leg strut in lacquered solid wood, fits into one left leg and one right leg. The B90 and B60 tables take different lengths. Specify when ordering.
Varnished solid wood part which forms the wall around the pitch. Stapled to the long inner sides of the cabinet
Green PVC (without solvents or heavy metals) covering glued to the playfield
The longest Bonzini handle, designed for the “Snake” or “Snake shot” technique, style of play common in national and international competitions.
Material: Magnesium; this material develops a patina over time. Engraved Bonzini logo. - Dimensions and weight: Diameter 30 mm / L 120 mm / 120 g
For more information: visit the “Our Handles” section.
Polished cast aluminium part, attached to the cabinet from the top using pins
Lacquered solid wood part. Left leg and right leg versions available. Please specify when ordering. The B90 and B60 tables take different lengths.
Light grey PVC (without solvents or heavy metals), covering for the playfield
External rod with threaded steel end and special ITSF Mécanindus pin, player not included.
Black PVC (without solvents or heavy metals), covering for the playfield
External rod with threaded steel end and special ITSF Mécanindus pin to which the goal keeper is attached, player not included.
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in dusty rose - Weight: 139 g
For more information: visit the “Our Handles” section.
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in pastel green - Weight: 139 g
For more information: visit the “Our Handles” section.
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in pastel blue - Weight: 139 g
For more information: visit the “Our Handles” section!
An ultra-contemporary shiny and matte finish and a new feel!
Material: Aluminium and silicone in anthracite grey - Weight: 139 g
For more information: visit the “Our Handles” section.
Set of 2 large pieces, 2 small left-side pieces and 2 small right-side pieces (total of 6 solid wood parts), all solid wood. Stapled to the 4 inner sides of the cabinet around the pitch.
Fixed playfield with pitch (split version only for the B60 for pitch cleaning)
Playfield with pitch; split version only for the B60 for pitch cleaning
DID YOU KNOW?
Our B60 and B90 foosball tables last 30 to 40 years!
For more information: visit the “100% French Quality” section!